2017年1月16日星期一

TPEs and the Medical Industry

TPEs have been used for several years in the medical industry. They were initially adopted as
replacements for SBR, latex, and polyisoprene. Those materials did not offer design freedom, and TPEs had similar stress-strain performance. TPE materials can also be easily extruded, which makes them appropriate for tubing and elastic bands. Characterized by softness and suppleness, TPEs also appeal to consumers and are therefore popular for many healthcare products used in a home setting.
Early TPE formulations were considered for thermoset stopper replacement in syringes but failed to meet performance requirements. New formulations and other advances, however, have improved performance of TPEs for stopper applications. As TPE technology has evolved, these materials are being considered for overmolded designs to enhance the feel, ergonomics, and aesthetics of the final part.
Desirable attributes such as softness and ease of molding provide opportunities for TPE use in medical applications such as orthopedics, surgical equipment, syringe plungers, needle shields, face masks, resuscitator and breathable bags, and home-use medical devices. With new formulations, these materials help to address regulatory, performance, design, and cost requirements.
learn more: http://www.gainshinetpe.com/tpes-and-the-medical-industry.html

2017年1月2日星期一

Guide to Sex Toy Materials

This material is commonly referred to as ‘flesh-like’ in both appearance and texture. You will find TPE in sex toysproduced by Fleshlight, TENGA, Doc Johnson and Pipedream Toys to name a few.

Thermoplastic Elastomers (TPE) are, in basic terms, a mix of plastic and rubber. The difference here, is that generally they contain no PVC, Latex or Phthalates. You will recognize a product made from TPE by it’s soft, squishy texture that is often silky to the touch. This is because during production, the moulds used to create the toys are dusted with a ‘renewal’ powder (typically cornstarch) to stop them from sticking to the mould.

sex toysProducts made from this are usually a little bit more expensive than typical rubber toys. This also means they require a little bit more maintenance. Like Rubber, TPE toys are also porous – so again, you will want to ensure after each use, you thoroughly clean it with anti-bacterial toy cleaner and be sure it’s kept separate from other toys. It’s also advisable to not share this material with a partner unless you are fluid bonded with them. Using a condom could potentially reduce any risk and may increase the longevity of your toy. It’s not an exact science, unfortunately.

Things like TPR/TPE can be quite tricky. Technically speaking, it’s not toxic – but due to is porous nature, I would never use an insertable product made from TPE/TPR. For things like masturbators, it’s a little bit more lenient – but a TPE/TPR dildo or butt plug will retain odour no matter how much you clean it. So for anal use, I would personally steer clear.

To clean a toy made from TPE, this is best down with water and toy cleaner, and then patted dry with a lint free towel. You can also leave it to air dry. It’s best to ensure (especially with a toy like a stroker/masturbator) that the internal canal is totally clean and dry before storage otherwise this will cause irreparable damage to your toy. When the toy is dried, you can lightly dust the toy with cornstarch (or official ‘renewer’ powder) and this will return the toy back to it’s soft velvet appearance.

When using a toy made from TPE – you should only use a water-based lubricant. Silicone/Oil-based lubricants can cause the material to deteriorate.

know more: http://www.gainshine-tpe.com/news/Guide-to-Sex-Toy-Materials.html